| Instruments that are For Sale and/or Trade |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
| 1996 Flatiron Performer built in Montana after Gibson bought Flatiron. It is parallel braced, and in excellent condition except for two issues. One is that there is a finish check or craze on the top at the bridge foot and there is a finish crack around most of the perimeter of the back where the back and sides are joined. I am assuming that this is from the back contracting with age but there are no structural issues at all. The original fitted hard shell case is included. Contact Me |
Walnut body with flamed maple carved top finished with a three color burst. Neck is
lightly figure mahogany, ebony fretboard with side an top dots and streaked ebony
headstock veneer with torch and logo. Chrome hardware including sealed tuners and
custom Tun-O-Matic style bridge. Electronics include an Almuse humbucker with volume
as well as a onboard headphone amplifier. $650
lightly figure mahogany, ebony fretboard with side an top dots and streaked ebony
headstock veneer with torch and logo. Chrome hardware including sealed tuners and
custom Tun-O-Matic style bridge. Electronics include an Almuse humbucker with volume
as well as a onboard headphone amplifier. $650
Five string solid body with figured maple top on semihollow figured walnut body. Maple neck with ebony
fretboard with top and side markers. Ebony headstock with abalone logo. Body is currently routed for a
an Almuse humbucker. Control cavity on rear has been cut with laser to retain character of figured
back. Electronics options include volume, tone and three way switch plus an onboard headphone amp.
Hardware can be gold or chrome. Instrument is currently finished but needs assembled and will take a
couple weeks depending on schedule.The fretboard needs to be trimmed. Email for pricing.
fretboard with top and side markers. Ebony headstock with abalone logo. Body is currently routed for a
an Almuse humbucker. Control cavity on rear has been cut with laser to retain character of figured
back. Electronics options include volume, tone and three way switch plus an onboard headphone amp.
Hardware can be gold or chrome. Instrument is currently finished but needs assembled and will take a
couple weeks depending on schedule.The fretboard needs to be trimmed. Email for pricing.
